One paper strip, nine steps, no glue.

inthink.guide
ホームへ戻る

ひと折りから広がる創造力

Origami lucky star

Turn one narrow paper strip into a puffy five-pointed lucky star.

  • とても簡単
  • 9ステップ
  • About 5 minutes
  • 1 paper strip

Paper: One 9 × 0.4 in (24 × 1 cm) paper strip.

Your lucky star is ready!

9

numbered steps from strip to star

5

wraps that form the pentagon

24cm

long, narrow paper strip

0

cuts, glue or tape needed

Before you fold

The diagrams use arrows and fold marks to show the direction of each move.

  • Dashed line

    Fold along here. The line disappears inside the model once folded.

  • Curved arrow

    This shows the direction the paper travels.

  • Solid arrows

    Press at these points to shape the finished star.

  • Shading

    The shaded part is the layer currently facing you.

Keep the pentagon edges aligned as you wrap. Small inaccuracies become visible when you puff the star.

Fold your lucky star

Step 1 of 9

  1. Paper strip forming a loop at one end.
    Loop in progress.
    Paper strip pulled through the loop with a short tail remaining.
    Pull the loop through, leaving a short tail.
    Step 1: Make a loop

    Step 01

    Make a loop

    Start with a long, narrow strip of paper. Form a loop at one end and pull it through, leaving a short tail.

    You should seeA loose knot at one end of the strip, ready to flatten.

  2. Step 2: Flatten the loop

    Step 02

    Flatten the loop

    Flatten the loop so it forms a small pentagon.

    You should seeA flat pentagon with a long strip and a short tail.

  3. Step 3: Tuck the short tail

    Step 03

    Tuck the short tail

    Tuck the remaining short strip under both layers of the loop.

    You should seeA neat pentagon with only the long strip remaining.

  4. Step 4: Turn the model over

    Step 04

    Turn the model over

    Flip the model around.

    You should seeThe pentagon facing the other way, with the long strip ready to wrap.

  5. Step 5: Fold along the left edge

    Step 05

    Fold along the left edge

    Fold the pentagonal portion down, aligning its top-left edge with the width of the long strip.

    You should seeThe strip wrapped once around the pentagon.

  6. Step 6: Fold along the right edge

    Step 06

    Fold along the right edge

    Fold the pentagonal portion again, this time aligning its top-right edge with the strip.

    You should seeA second wrap that follows the next edge of the pentagon.

  7. Step 7: Keep wrapping

    Step 07

    Keep wrapping

    Repeat steps 5 and 6, alternating the edges you align, until only a short strip remains.

    You should seeA compact pentagon made from layered wraps.

  8. Step 8: Tuck the final tail

    Step 08

    Tuck the final tail

    Tuck the small remaining strip under both layers, as in step 3.

    You should seeA flat, fully enclosed pentagon.

  9. Step 9: Puff the star

    Step 09

    Puff the star

    Pinch at the five corners to puff up the star.

    You should seeA small five-pointed star with a raised centre.

Use the arrow keys to move between steps

Step 1 of 9: Make a loop

Completed five-pointed origami lucky star with a puffy centre.

Your lucky star is ready!

Pinch each of the five corners gently to puff the centre into a small star.

The finished traditional star has five soft points and a gently puffed centre.

If the pentagon twists
Undo the last wrap and align its edge with the pentagon before creasing.
If the paper tears
Use a slightly wider strip or loosen the wraps before tucking the tail.
If the star stays flat
Pinch one corner at a time toward the centre instead of squeezing all five at once.
More origami models